John deere grain header

John deere grain header DEFAULT

In addition to the release of the all-new X9 Combines, Deere also announced updates to its entire line of headers for 2021. The new lineup available in our area includes the HDR Rigid Cutterbar Drapers, RDF HydraFlex™ Drapers, and CR and CF Corn Heads. Each is compatible with the new John Deere X Series as well as most S Series Combines to help operators maximize their harvest operations while reducing grain loss in a wide range of conditions.

Let’s take a look at each of the headers, their key features and benefits:

HDR Rigid Cutterbar Drapers

John Deere’s HDR Rigid Cutterbar Drapers are ideal for soybean and small grain growers who want to harness their combines’ ability to harvest more acres per hour across various crops, conditions, and uneven and rolling terrain all while capturing more grain. The HDR features a new hinged frame that provides unparalleled terrain-following capability and more uniform cut height when harvesting on curves or uneven terrain. MacDon® owners should take notice. When you compare Deere’s HDR models to the MacDon® FD145, it has double the wing range at up to 22.9 on the HD50R, more consistent reel to cutterbar distance, and 25% more consistent stubble height.*

A valuable option available on the HDR models are Grain Saver Draper Belts which reduce cutterbar loss by 25% when compared with traditional, smooth draper belts, and are very effective for soybeans and small grains. Both the HDR and RDF models include a Two-Speed Center Feed Section. The slow speed helps to reduce throwing of easily shelled crops like soybeans.

There are 4 models available from the HD35R to the HD50R ranging in size from 35 ft. to 50 ft. cutting widths. The HD50R plus X9 1100 Combine can harvest up to 30 acres of soybeans or wheat per hour. When farmers upgrade from a 45 ft. model to a 50 ft. model, they can harvest up to 33 more acres per day. That’s some increase in productivity.

RDF HydraFlex Drapers

The RDF HydraFlex Draper models expand on Deere’s proven 700FD models while providing new grain saving features and benefits. These 4 new draper models with cutting widths ranging from 35 ft. to 45 ft. are compatible with X Series and even S Series Combines dating back to model year 2012. The Two-Speed Center Feed Section lets operators slow down the feed drum and center feed belt by 20% compared with the John Deere 700FD, allowing operators to reduce grain loss in easy shelling crops like soybeans while still harvesting at faster speeds without sacrificing cut quality. Other new features include header control unit for model year 2021, and the new auto belt speed that automatically adjusts the side belt to ground speed. These drapers carryover the field-proven John Deere 4-inch double-cut, dual-drive shaft HydraFlex Cutterbar. The knife system provides industry-exclusive cutting performance by making 1,980 cuts per minute to enable faster harvesting speeds.

CR and CF Corn Heads

In addition to the updated draper lineup, Deere also released updates to its rigid and folding corn heads. The new models are compatible with X Series and S Series Combines and are designed to help farmers harvest more bushels per hour in high-yielding corn while minimizing grain loss and damage. These models are also designed to match the higher capacity of X Series Combines letting you harvest as many as 7200 bushels of corn per hour.  

CR Rigid Corn Heads

The standard John Deere CR Corn Heads are available in 6 to 18 row models and feature many new innovations. The heads feature a larger 19-inch auger with higher torque to help cover more acres per hour and utilize the full potential of the combine’s power and capacity. Also, a smaller and more consistent gap between the auger flighting and rolled floor helps minimize the opportunity for ears to pinch or grind, reducing grain damage during harvest. For down or flat corn, the CR Corn Heads can be equipped with factory-installed Active End Fenders that pull more stalks into the head as the combine moves through the field. These heads all come with new factory-installed Stalk Deflectors that press corn stalks to the ground and fracture them at the base as the head passes over them. These deflectors reduce tire or track wear caused by standing corn stalks and help preserve the trade-in value of the combine and other equipment. And for nighttime operation, the heads feature industry-exclusive end-divider point lighting to help grain cart operators see the edge of the corn head and combine operators make sure they are in the right row after headland turns. The CR Corn Heads are all equipped with the proven RowMax™ Row Units with customizable Stalk Roll options.

CF Folding Corn Heads

Deere’s folding corn head lineup includes all the same updates as the rigid corn heads but also features a low-profile folding frame. The 12-, 16- and 18-row CF Folding Corn Heads are available for the X Series Combines and only the 12-row heads for S Series Combines. These folding models are ideal for customers looking for both productivity in the field and easy transport between fields. The CF Corn Heads boost industry-leading fold times in less than 60 seconds when attached to Deere S700 Combines and approximately 40 seconds with the Deere X9 Combines. Operators will also notice better visibility when the head is in the folded position. When compared to the 700FC, customers will notice an 8-foot, 2-inch visibility increase and a 14-foot, 4-inch visibility increase versus the Geringhoff Rota Disc®. Benefits of a folding corn head include decreased transport time, eliminating the need for extra header trailer equipment, and less storage space required.

We hope you enjoyed this look at Deere’s updated harvest header lineup. As Deere continues to release new updates and products, we will be here to inform you and answer any of your questions. If you are interested in any of the draper or corn head options discussed above and to review compatibility, please contact one of our sales team members or request a quote.

*Performance claims are based on internal testing, and on field and crop conditions at time of testing; individual results may vary. 

Sours: https://www.prairiestatetractor.com/blog/john-deere-header-updates-for-model-year-2021--24843

2017 John Deere 622F Grain Head

JD 622F A185506A (01)

Serial Number

1H00622FVH0795012

Location

Rushville, Indiana

Options

John Deere 622F HydraFlex Platform '17

(Hines)

Auger w/Full Width Composite Fingers

View all options

2007 Geringhoff 1230 Corn Head

GH 1230 A188042B (01)

Options

Geringhoff NorthStar 1230 Folding Corn Head '07

30" Spacing

John Deere Adapter Interface

View all options

2013 John Deere 640FD Draper Platform

JD 640FD A190851A (01)

Serial Number

1H0640FDAD0755635

Options

John Deere 640FD HydraFlex Draper Platform '13

Poly Tine Pickup Reel

Header Height Sensing w/Lateral Tilt Sensors

View all options

2016 John Deere 635F Grain Head

JD 635F A183404C (01)

Serial Number

1H00635FHG0785181

Options

John Deere 635F HydraFlex Platform '16

Auger w/Full Width Composite Fingers

Header Height Sensing w/Lateral Tilt Sensors

View all options

2019 John Deere 706C Corn Head

JD 706C A191605A (01)

Serial Number

1H00703CVJX805004

Options

John Deere 706C Corn Head '19

30" Row Spacing

Hard-Faced Deck Plates w/Hydraulic Adjustment

View all options

2014 MacDon FD75 Draper Platform

MD FD75 A204775A (01)

Location

Rushville, Indiana

Options

MacDon FD75-40 Flex Draper Head '14

5 Bat Pick-Up Reel w/HD Plastic Fingers

John Deere Feederhouse Adapter

View all options

2013 John Deere 606C Corn Head

JD 606C A194867A (01)

Serial Number

1H00606CLDX755604

Options

John Deere 606C Corn Head '13

30" Row Spacing

Hydraulic Adjust Deck Plates

View all options

2010 John Deere 635F Grain Head

JD 635F A183708A (01)

Serial Number

1H00635FEA0737866

Location

Greensburg, Indiana

Options

John Deere 635F HydraFlex Platform '10

Poly Tine Pickup Reel

Hydraulic Fore-N-Aft & Dial-A-Speed Reel

View all options

2014 John Deere 625F Grain Head

JD 625F A189688B (01)

Serial Number

1H00625FHE0765519

Options

John Deere 625F HydraFlex Platform '14

Auger w/Full Width Composite Fingers

Header Height Sensing w/Lateral Tilt Sensors

View all options

2011 John Deere 625F Grain Head

JD 625F A190425B (01)

Serial Number

1H00625FLB0740686

Options

John Deere 625F HydraFlex Platform '11

Auger w/Full Width Composite Fingers

Header Height Sensing

View all options

2004 John Deere 625F Grain Head

JD 625F A190622B (01)

Serial Number

H00620F706627

Location

Richmond, Indiana

Options

John Deere 625F HydraFlex Platform '04

Auger w/Full Width Composite Fingers

Standard Telescoping Driveline

View all options

2004 John Deere 635F Grain Head

JD 635F A669186B (01)

Serial Number

H00635F706625

Options

John Deere 635F HydraFlex Platform '04

Auger w/Full Width Composite Fingers

Header Height Sensing/Contour Master

View all options

2007 Geringhoff NS1200 Corn Head

GH NS1200 A189633A (01)

Location

Greensburg, Indiana

Options

Geringhoff North Star 1200 Corn Head 12-Row '07

30" Spacing

John Deere Adapter/Interface

View all options

2013 John Deere 635FD Draper Platform

Koenig Equipment - default image

Serial Number

1H0635FDHD0755976

Options

John Deere 635FD HydraFlex Draper Platform '13

Header Height Sensing w/Lateral Tilt Sensors

Poly Tine Pickup Reel

View all options

2015 John Deere 608C Corn Head

JD 608C A195093A (01)

Serial Number

1H00608CJFX775135

Location

Rushville, Indiana

Options

John Deere 608C Corn Head '15

Intermeshing Knife Stalk Rolls

AutoTrac RowSense Sensors

View all options

2013 830 II Corn Head

DR 830 II A189630A (01)

Options

Drago 830 II N8 Corn Head '13

8-Rows @ 30" Spacing

John Deere Adapter Interface

View all options

2011 John Deere 612C Corn Head

JD 612C A190375A (01)

Serial Number

1H00612CCB0745202

Location

Greenfield, Indiana

Options

John Deere 612C Corn Head 12-Row '11

30" Row Spacing

StalkMaster Chopping Head

View all options

2004 John Deere 630F Grain Head

JD 630F A188031B (01)

Serial Number

H00630F708097

Options

John Deere 630F HydraFlex Platform '04

Auger w/Full Composite Fingers

Header Height Sensing/Contour Master

View all options

2008 John Deere 635F Grain Head

JD 635F A196204A (01)

Serial Number

H00635F725343

Options

John Deere 635F HydraFlex Platform '08

Auger w/Full Width Composite Fingers

Header Height Sensing w/Lateral Tilt Sensors

View all options

2008 John Deere 630F Grain Head

Jd 630F A194757A (01)

Serial Number

H00630F726050

Options

630F HydraFlex Platform

Auger w/Full Width Composite Fingers

Header Height Sensing w/Lateral Tilt Sensors

View all options

2013 John Deere 630F Grain Head

JD 630F A183404G (01)

Serial Number

1H00630FCD0755711

Options

John Deere 630F HydraFlex Platform '13

Auger w/Full Width Composite Fingers

Header Height Sensing w/Lateral Tilt Sensors

View all options

2006 John Deere 635F Grain Head

JD 635F A183327C (01)

Serial Number

H00635F716811

Options

John Deere 635F HyrarFlex Platform '06

Auger w/Full Width Composite Fingers

High Stone Dam 57MM

View all options

2014 John Deere 630F Grain Head

JD 630F A191937A (01)

Serial Number

1H00630FTD0765214

Options

John Deere 630F HydraFlex Platform '14

Auger w/Full Width Composite Fingers

Header Height Sensing w/Lateral Tilt Sensors

View all options

2017 John Deere 630F Grain Head

JD 630F A191565B (01)

Serial Number

1H00630FPH0795255

Options

John Deere 630F HydraFlex Platform '17

Auger w/Full Width Composite Fingers

Header Height Sensing w/Lateral Tilt Sensors

View all options

Sours: https://www.koenigequipment.com/equipment/used/agricultural-equipment/combine-heads
  1. Borosilicate oil burner
  2. Latice crawford amazing
  3. 4runner transfer case fluid
  4. 2013 bangers

John Deere 630D Grain Head

TypeStraight line knife drive systemLength9.3 m \30.5 ftKnife driveDual knife base, single optional (for combine use only)Knife speed490 cycles/minCutterbar tiltBase hydraulic, 9 degrees tilt maximum

Pickup reel

Number of slats6 bat poly base, 6 bat steel optionalFingersNylon base, steel optionalDiameter1,067 mm \ 42 in.Height controlHydraulicSpeed controlHydraulicReel liftCylinder stroke 330 mm \ 13 in.Reel fore and aftCylinder stroke 359 mm
14.1 in.Reel resumeBaseReel reverseBaseOperating speeds6-54 rpm

Draper belts

WidthSide belts 1,016 mm \ 40 in.Center belts 1,397 mm55 inClean height25.4 mm \ 1 in.Operating speedSide belts: variable up to 223 m/min735 fpmCenter belts: 212 m/min695 fpmCenter belt not included with SPW configurationSpeed controlHydraulic from cabCenter belt reverseBase; Center belt not included with SPW configuration

Feed drum

Diameter406 mm \ 16 inFeed drum fingersHeavy duty round 16 mm (0.625 in) diameter with breakaway notch and retainerNumber of fingers18Auger finger platformDual chevron, retractingFinger reach195 mm \ 6 in.Drum/auger reverseBaseOperating speed195 rpmCenter clean out doorBaseHeader height sensingTypeElectro-hydraulic baseHeader height sensing on the groundBaseHeader height sensing off the groundBaseAuxiliary top augerTypeOptional hydraulic driveDimensionsPlatform length10.0 m \ 32.9 ftOverall operating depth2.5 m \ 8.2 ftTransport width, field position9.9 m \ 32.5 ftTransport width on wheel, less dividers2.7 m \ 8.9 ftTransport length, hitch extended12.3 m \ 40.4 ft

Weight

Approximate weight (pickup reel)Combine only 3,109 kg \ 6,855 lbSPW only 2,509 kg \ 5,532 lbApproximate weight (with transport)Combine only 3,286 kg \ 7,245 lbSPW only 2,686 kg \ 5,922 lb
Sours: https://www.meridianexport.com/product/jd-630d-grain-head/
How to Install a May Wes UHMW Grain Head Auger Trough Liner

John Deere Introduces Entire New Header Lineup Including Drapers, Corn Heads and a Belt Pickup

John Deere X9 Combine working in canola field

When used with a John Deere X9 Combine, a BP15 Belt Pickup can handle 30 acres of wheat or 23 acres of canola windrows per hour.

OLATHE, Kan. (June 15, 2020) — John Deere has updated its entire header lineup for combines to include new HDR Rigid Cutterbar Drapers, RDF HydraFlex™ Drapers, CR and CF Corn Heads and a BP15 Belt Pickup. Each is compatible with John Deere X Series and most S Series and T Series Combines to help achieve maximum harvesting capacity while minimizing grain loss under a wide range of crops and conditions.

John Deere HDR Rigid Cutterbar Drapers are ideal for small grains, oilseed or soybean growers who want to maximize their combine’s acres per hour across various crops, changing conditions and uneven or rolling terrain while capturing more grain. “The HDR has a new hinged frame that provides unmatched terrain-following capability with twice the wing range as a MacDon® FD1 FlexDraper® with uniform cut height when harvesting on curves or uneven terrain,” said Matt Badding, harvesting product manager for John Deere.

An HDR Draper will help unlock more of the combine’s harvesting capacity and capture more grain from the field, especially when harvesting down or lodged crops, according to Badding. “These easy-to-use drapers effectively pick up and sweep the down or lodged crop across the cutterbar to recover more crop thanks to a consistent distance between the reel fingers and cutterbar, improved reel range and increased reel-drive motor torque,” Badding said. “HDR Drapers can be ordered with optional John Deere Grain Saver Draper Belts. These belts can save farmers up to $1,240 USD ($1,750 CAD*) per year across 1,500 acres by reducing canola cutterbar loss up to 25% when compared with traditional, smooth draper belts.”

HDR Drapers are available in cutting widths from 35 feet to 50 feet to bring more crop into your combine with each pass, increasing the number of acres harvested per hour and per day. “Farmers can upgrade from our 45-foot-wide draper to the new 50-foot wide draper and can harvest up to 33 acres more per day,” Badding said.

John Deere RDF HydraFlex Drapers are built on the field-proven cutting technology of the existing John Deere 700FD while providing new features to reduce grain loss. These new drapers are compatible with new X Series, S Series and T Series Combines dating back to model year 2012. All RDF HydraFlex Drapers feature a new Two-Speed Center Feed Section that lets operators slow down the feed drum and center feed belt by 20% compared with the 700FD. “This puts more grain in the tank by reducing free grain loss. Operators can easily go from low to high speed to save easy shelling crops such as soybeans,” Badding said. “RDF HydraFlex Drapers reduce grain loss and let operators harvest at faster speeds without sacrificing cut quality.”

These drapers, carryover the field-proven John Deere 4-inch double-cut, dual-drive shaft HydraFlex Cutterbar. The knife system provides industry-exclusive cutting performance by making 1,980 cuts per minute to enable faster harvesting speeds. Two center feed belt options are available as standard equipment to optimize the RDF HydraFlex Draper for multiple crops and conditions. The standard belt minimizes pod tossing in easy-shelling crops such as soybeans. An optional cleated center belt is available to feed higher-volume crops like canola into the feed drum.

John Deere CR Rigid Corn Heads help farmers who use X Series, S Series and T Series Combines to harvest more bushels per hour in high-yielding corn while minimizing grain loss and damage. “These heads feature a 19-inch cross auger and rolled auger floor to help improve grain handling,” Badding said. “The higher torque of the large auger ensures the corn head is not the limiting factor so farmers can realize the true bushels-per-hour potential of the combine. The space between the auger flighting and rolled auger floor minimize the opportunity for ears to pinch or grind, reducing grain damage during harvest.”

For harvesting leaning, down or flat crop, CR Rigid Corn Heads can be equipped from the factory with Active End Fenders that pull more stalks into the head as the combine moves through the field. Another new feature of these heads is the factory-installed Stalk Deflectors that press standing corn stalks to the ground and fracture them at the base as the head passes over them. These deflectors reduce tire or track wear caused by standing corn stalks and help preserve the trade-in value of the combine and other equipment moving in and out of fields.

John Deere CF Folding Corn Heads include all the features of CR Rigid Corn Heads but feature a low-profile folding frame. “These heads are ideal for farmers who demand high productivity in the field and easy transport between fields during tight harvest windows,” Badding said. There are 12-, 16- and 18-row CF Folding Corn Heads available for X Series Combines and 12-row heads for S Series Combines.

CF Folding Corn Heads feature an industry-leading fold cycle time of less than 60 seconds when the corn head is connected to Deere S700 Combines and approximately 40 seconds with Deere X9 Combines. When transporting between fields, operators will appreciate the 8-foot, 2-inch improvement in visibility over the 700FC and 14-foot, 4-inch visibility improvement over the Geringhoff Rota Disc®.

“A John Deere CF Folding Corn Head reduces a farmer’s operating costs by eliminating the need to purchase a header trailer to transport between fields,” Badding said. “The folding corn head also eliminates the time needed to mount the header to a trailer and then reattach it to the combine at the next field. After harvest, the head requires less storage space in the shed.”

John Deere is also offering the BP15 Belt Pickup for small grains and oilseed growers who need to harvest more acres per hour with an X Series, S Series or T Series Combine. “These new belt pickups deliver a 20% faster feed rate than the Deere 615P to easily handle high-volume crops in tough conditions,” Badding said. “Compared with the 615P, this new pickup has a wider feederhouse opening with adjustable feed auger flighting and tines that allow this belt-pickup platform to harvest more acres per hour. When used with an X9 Combine, a BP15 can handle 30 acres of wheat or 23 acres of canola windrows per hour.”

The BP15 features improved feed rate adjustability to handle large or bulky crops with a standard two-speed auger drive sprocket that delivers a 20% faster feed rate that’s ideal for harvesting canola. A slower speed feed rate can be used for less bulky crops like cereals and grass seed. A factory-installed crop shield minimizes grain loss by ensuring more crop goes through the feederhouse, preventing it from building up and laying on the feederhouse. “Operators will spend less time making adjustments and more time harvesting,” Badding said. “For example, no tools are needed to adjust the height of the large, 20-inch gauge wheels for varying windrow conditions and crop types.”

Each of the new drapers, corn heads and the belt pickup come with a header control unit (HCU) that communicates seamlessly with the combine. The HCU saves head-specific factory calibration settings and collects and sends header-width information to the combine for accurate yield mapping. “The HCU also detects and reports header-specific diagnostic codes, plus tracks hours of use and maintenance intervals,” Badding said. “With this information in hand, farmers can now protect their new header investment with a John Deere PowerGard ™ Protection Plan extended warranty program.”

John Deere dealers will start taking orders for the drapers, corn heads and belt pickup later this summer. For more details visit your local dealer or JohnDeere.com.

*Note: Based on foreign exchange rate as of March 31, 2020, and assumption: 0.125 bushel savings of canola per acre.

 

Sours: https://www.deere.com/en/our-company/news-and-announcements/news-releases/2020/agriculture/2020jun15-drapers-corn-heads-belt-pickup/

Deere grain header john

.

Front End Equipment - John Deere X Series Combines

.

Now discussing:

.



56 57 58 59 60